Home arrow Power Supply arrow Rack mount arrow NETGEAR® RPS
RPS Power Supply Series™

Optimal Power® rack mount product line RPS Power Supply Series™ is specifically designed by Optimal Power Supplies LLC for NETGEAR®, as the ONLY tested and certified solution for alternative power source for NETGEAR®’s RPS (Redundant Power Supply) capable switches.

Product Description

RPS Power Supply Series™ is a unique and a highly reliable power supply series. It is used as a redundant power supply for NETGEAR® RPS capable PoE, 10/100 Ethernet, and Gigabit Ethernet switches. The power supplies in this series are tested and verified by NETGEAR®.

The RPS Power Series™ is designed for Universal AC to DC power supply applications. Because of this feature these power supplies can be used anywhere in the world.

The Model RPS5412 is a 1U rack mountable RPS (Redundant power supply). The RPS has an ON/OFF switch, and an associating DC power LED.

Specifications:

Electrical
Output Voltage–52V DC+12V DC
Output RippleTypical 200mVTypical 120mV
Output CurrentTypical 5.77A max.Typical 9A max.
Output Power*300W100W
Input VoltageUniversal 90VAC to 264VAC input
Input Frequency47Hz to 63Hz
Input Current5 Ampere maximum

Typical Safety Rating

Designed in full compliance withUL60950
 CSA 222 No 234
 EN60950
EMIEN55022 "Class A"
EMSEN61000-4-2,-3,-4,-5,-6,-8,-11
HarmonicsEN61000-3-2 Class D
UL file No.E257685

Environmental

Overload ProtectionAuto-recovery
Functional Temperature0 to 70 °C
Storage Temperature-20 to 85 °C
Over voltage TypeLatch off
Efficiency80-90% Typical
RoHSYES
Dimensions1U (1.75" H x 19" W x 12.12" D)
Weight Approx.11.55 lb = 5239 g = 184.80 oz

Model Number Table


Supported
NETGEAR® Switch Model
Optimal Power
RPS Models
Optimal Power
DC Cable
Data Sheet Manual
GSM7224-200 RPS5412 RPSC5412 RPS5412 data sheet RPS5412 manual
GSM7248-200 RPS5412 RPSC5412
GSM7228PS RPS5412* RPSC5412
GSM7252PS RPS5412* RPSC5412
GSM7328S-200 RPS5412 RPSC5412
GSM7352S-200 RPS5412 RPSC5412
GSM7328FS RPS5412 RPSC5412

* NOTE The Model RPS5412 only provides up to 300W for POE application. If POE devices connected to the switch system need more than 300W, then this device is not recommended.

For information on NETGEAR® RPS systems contact This email address is being protected from spam bots, you need Javascript enabled to view it  or 251-209-8088 Ext 23

For information on NETGEAR® RPS capable switches visit http://www.netgear.com
 
© 2003 - 2012 Optimal Power. All rights reserved.
Optimal Power is owned by Optimal Power Supplies LLC.